服務熱線
86-021-64576299
The EE600 is dedicated for reliable measurement of differential pressure in HVAC, building automation and filter monitoring applications. The multi range device can be employed for air as well as all non-flammable and non-aggressive gases.
Measurement Performance
The EE600 is available with full scale (FS) 1,000 Pa (4 inch Water Column) and 10,000 Pa (40 inch WC) and offers an outstanding accuracy of ± 0.5 % FS. For the versions with analogue outputs, several measuring ranges are selectable with DIP-switches. The piezo-resistive, no flow-through pressure sensing element stands for outstanding long-term stability.
Analogue and Digital Outputs
The measured data is available on the analogue voltage and current outputs or on the RS485 interface with Modbus RTU
or BACnet MS/TP protocol.
Functional and Robust
The IP65 / NEMA 4 enclosure minimizes installation costs. External mounting holes allow for installation with closed cover, the electronics are thus protected against construction site pollution.
Configurable and Adjustable
The setup and adjustment can be easily performed with DIP-switches and push buttons on the electronics board (EE600 with analogue outputs) or with an optional adapter and the free EE-PCS configuration software (EE600 with RS485 interface). The setup includes pressure range, output signal, response time, display units and backlight. Beside differential pressure measurement, the EE600 can be set up for volume flow or air velocity measurement, as well as for filter monitoring or level indication. A zero and span point adjustment can be easily performed with push buttons on the electronics board.
EE600 差壓傳感器專用于暖通空調、樓宇自動化和過濾器監控應用中的壓差可靠測量。多量程裝置可用于空氣以及所有非易燃和非腐蝕性氣體。
測量性能
EE600可提供滿量程（FS）1000 Pa（4英寸水柱）和10000 Pa（40英寸WC），并提供±0.5%FS的高精度。對于具有模擬輸出的版本，可使用DIP開關選擇多個測量范圍。壓阻式、無通流式壓力傳感元件具有出色的長期穩定性。
模擬和數字輸出
測量數據可通過模擬電壓和電流輸出或通過帶有Modbus RTU的RS485接口獲得
或BACnet MS/TP協議。
功能強大
IP65/NEMA 4外殼將安裝成本降至較低。外部安裝孔允許使用封閉蓋進行安裝，從而保護電子設備免受施工現場污染。
EE600 差壓傳感器可配置和可調整
通過電子板上的DIP開關和按鈕（帶模擬輸出的EE600）或可選適配器和免費的EE-PCS配置軟件（帶RS485接口的EE600），可以輕松執行設置和調整。設置包括壓力范圍、輸出信號、響應時間、顯示單元和背光。除了差壓測量外，EE600還可用于體積流量或空氣速度測量，以及過濾器監測或液位指示。零點和量程點調整可以通過電子板上的按鈕輕松執行。
